Product Features
· BELLAZN series double seat control valve with BELL electric linear actuator,High precision adjustment, and has a fault alarm function.
·According to user needs, BELLAZN series double seat control valve can also increase the inplace panel display and remote control settings.
· double seat control valve can withstand higher pressure, differential pressure of input and output is large could choose such valves.
Parameters of Automatic Control Valve
The material of valve body: cast iron, cast steel, cast stainless steel and so on.
Pressure grade: 1.6Mpa, 4.0Mpa, 6.4Mpa
Connecting type: Flanged according to JB79-59
Temperature range: normal temperature -20---230ºС the thermal fin type -60---450ºС
Operation form: electric power on or off
Flow characteristic: equal percentage, linear
Leakage: 0.5%* rating Kv
The main parameters of the actuator
·Input, output signal: 4-20mA DC;
·Input channel resistance: 250 ohms;
·Basic error: ± 1%;
·Dead: 0.5% --3% (adjusted according to system requirements);
·Power supply voltage: Three-phase 380V 50Hz single phase 220V 50Hz (other power can be customized);
·Working temperature: Integral type -10 ℃ ~ + 55 ℃, Discrete type -25 ℃ ~ + 70 ℃;
·Operating humidity: ≤85%, ambient air does not contain corrosive properties;
·Protection class: IP65, bus type, intelligent IP67;
·Communication Interface: bus line with international standard protocol PROFIBUS-DP.
BELLAZN、ZAZN double seated control valve specification table
Normal diameter DN | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 |
Rated flow coefficient Kv | 10 | 16 | 25 | 40 | 63 | 100 | 160 | 250 | 400 | 630 | 1000 | 1600 |
Normal Pressure PN MPa | 1.6 4 6.4 | |||||||||||
With DKZ actuator | DKZ-4200 | DKZ-4300 | DKZ-5400 | DKZ-5500 | DKZ-5600 | |||||||
With BELL actuator | BELL-A+Z64 | BELL-A+Z160 | ||||||||||
Rated travel (mm) | 16 | 25 | 40 | 60 | 100 | |||||||
Flow characteristics | Equal percentage Linear | |||||||||||
10Action mode | electric power on electric power off | |||||||||||
temperature range | Normal temperature type -20~200℃ Thermal fin type -60~450℃ |
Note: The large-diameter double seat control valve can be customized according to user requirements.
About descriptions of Actuator, please see "Valve Actuator" section.
Size chart (with BELL straight stroke electric actuator)
Diameter DN | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | |
L | 1.6MPa | 185 | 200 | 220 | 250 | 275 | 300 | 350 | 410 | 450 | 550 | 670 | 770 | 注 |
4.0MPa | 190 | 210 | 230 | 255 | 285 | 310 | 355 | 425 | 460 | 560 | 740 | 803 | ||
6.4MPa | 200 | 210 | 235 | 265 | 295 | 320 | 370 | 440 | 475 | 570 | 750 | 819 | ||
H | Normaltemperature | 660 | 663 | 753 | 758 | 809 | 819 | 831 | 882 | 892 | 934 | 1334 | 1410 | |
Thermal Fin type | 796 | 799 | 881 | 886 | 972 | 982 | 994 | 1079 | 1089 | 1131 | 1636 | 1656 | ||
B | 407 | 407 | 460 | 460 | 460 | 460 | 460 | 460 | 460 | 460 | 480 | 480 | ||
C | 280 | 280 | 280 | 280 | 280 | 280 | 280 | 280 | 280 | 280 | 280 | 280 |
Note: The large-diameter double seat control valve can be customized according to user requirements
The basic dimensions of pipe flange:cast iron body PN1.6 according to JB78-59
cast Steel body PN4.0, PN6.4 according to JB79-59