Profile
Pinch Valves, also known as hose valve,It's our new product according to the latest standards to designed and manufactured ,In modern industry,Some Solid or Liquid medium (containing granules, powders, fibers, sticky pulp) of abrasive substance or chemical processes with corrosive media,will transport by pipeline,Pinch Valve is the best choice.
It can be used in:
Sewage treatment plants (sludge, sand cleaning, raw sewage, lime, carbon slurry),
Power plants (FGD systems, ash handling system, coal transport),
Mining (tailings, flotation control,mud pipelines,tailings filling,many areas of various other slurry),
Chemistry (corrosive and abrasive media, powder, granules) and paper mills, pulp mills, electronics industry, food industry, cement, sand, glass etc.
Suitable for all corrosive, non-corrosive gas, liquid, semi-liquid and solid powder medium, To be intercepted and regulation,It can be installed in any position.
Feature
1、Unobstructed flow path, full bore
2、Low flow resistance
3、Without blocking
4、Could close in Zero leakage when there are residual particles
5、Without gaps and corners hinder valve operation
6、Low maintenance costs
7、Simple design, free from external adverse environmental impacts
Main parameters of the actuator
· Input and output signals: 4—20mA DC;
· Input channel resistance :250ohm;
· Basic error: ±1%;
· Dead zone:0.5%--3%(Could be adjusted according to system requirements);
· Supply Voltage :3Phase 380V 50Hz 1phase 220V 50Hz(Other power supply can be customized);
· Working ambient temperature: Integral Type -10℃~+55℃,Discrete Type -25℃~+70℃ ;
· Working environment humidity: ≤85%,Ambient air does not contain corrosive properties;
· Protection class: IP65,Bus Type& Intelligent Type:IP67;
· Communication Interface:Bus Type compliance with international standard protocol PROFIBUS-DP。
Model Description
Main performance specifications
Nominal pressure PN(MPa) | Test pressure MPa | Operating temperature (℃) | Suitable medium | |
Strength | Seal | |||
0.6 | 0.9 | 0.66 | ≤80℃ | Water, Sewage, Weak acid ect. |
1.0 | 1.5 | 1.1 | ||
1.6 | 2.4 | 1.76 |
Major parts material
Part Name | Valve Body | Disc | Hose | Valve Stem |
Material | Gray cast iron Aluminum Alloy stainless steel Carbon steel | Cast Iron | Natural rubber EPDM Wear rubber | Carton Steel |
Mainly structural connection size
Nominal diameter | L | D | D1 | Z-φ | H | A | B |
DN25 | 145 | 115 | 85 | 4-14 | 763 | 460 | 280 |
DN32 | 160 | 135 | 100 | 4-18 | 828 | ||
DN40 | 180 | 145 | 110 | 4-18 | 833 | ||
DN50 | 210 | 165 | 125 | 4-18 | 865 | ||
DN65 | 250 | 185 | 145 | 4-18 | 875 | ||
DN80 | 300 | 190 | 160 | 4-18 | 898 | ||
DN100 | 350 | 215 | 180 | 8-18 | 910 | ||
DN125 | 430 | 245 | 210 | 8-18 | 925 | ||
DN150 | 500 | 280 | 240 | 8-23 | 945 | ||
DN200 | 650 | 335 | 295 | 8-23 | 970 |
If you have special requirement,please let us know.
We could design & production according to your requirement.